Bedroll Speaker Mount kit from a PVC tube! store Fits 6" sch 40. Two speaker pods w 3" speakers , two 5.25" speakers in either end of tube!.
Bedroll Speaker Mounting Kit. New for 2020 is the PVC Tube
This design was requested by a repeat customer who wanted larger speakers than are offered on other Bed roll style speakers. Commercially available systems use a 4" tube and 4" speakers and and are only available in complete systems.
This kit gives you the freedom to create your own larger and louder system than commercially available systems.
I am providing the customization that the people are craving! Get more bass, more volume and fully integrated stylish and curvatious midrange speaker pods.
After extensive development and testing I am pleased to present a mounting kit for making a large diameter bedroll speaker system.
This kit will allow you to make a speaker system from a 6" Schedule 40 PVC tube.
The kit includes two (2) End Brackets that allow attaching 5.25" speakers and two (2) Pods that allow mounting 3" speakers. Includes all mounting hardware required to attach the brackets and speakers to the customer supplied 6" PVC tube.
All kit components are shown in Silver color in the photos. The white tube test mule and Dayton full range 3" speakers are shown for reference only. No speakers are provided in this kit.
The pods can be attached anywhere along the tubes length and at any angle. PVC tube is not provided with the kit as you would cut the tube length for your desired project.
The pictures show a typical layout for a bedroll speaker setup often seen on large cruiser bikes. This is a great kit for a motorcycle speaker system or even a home stereo speaker system when the pipe is vertical. Pictures show final pre-production geometry and silver color which provides greater detail than the production black color.
The pods mount securely to the PVC pipe with a base bracket using the supplied four (4) 8-32 button head cap screws (BHCS), molded washer (for inside of tube curvature) and a nyloc nut. The base easily mounts over fabric/blanket and securely holds onto the tube. The PVC tube does not need to be cut to provide clearance for the 3" speaker pods. Base has threaded inserts to provide a strong connection between the base and the pod.
The speaker mounts to the pod with four (4) 8-32 BHCS, washers and nyloc nuts. The pod can then be bolted to the base bracket with 4 (4) 8-32 BHCS.
The end rings are designed to set into the 6" schedule 40 PVC tube and attach with four (4) 8-32 BHCS. The nyloc nuts are recessed and captured by the end ring for easy mounting. You can mount 5.25" speakers directly to the speaker mounting rings using four (4) 8-32 BHCS and captured nyloc nuts.
The kit is designed to require a very minimal amount of fabrication (drilling 3/16" holes) to mount the rings and the base brackets.
Photos show a customers build mounted onto his motorcycle. Overall he was extremely satisfied and was amazed at the volume and sound quality of the system.
Major Components of the PVC Tube Speaker Kit:
END BRACKETS: End bracket fits inside the 6” schedule 40 PVC pipe. The end bracket is held in place with four (4) 8-32 black oxide 8-32 BHCS screwing directly into zinc plated steel nyloc fasteners recessed and fully integrated into the end bracket. The tube mounting holes in the end brackets are evenly spaced at 90 degrees apart. 5.25” speakers can mount to the bracket with four (4) 8-32 BHCS. Kicker 5.25” coax speakers fit nicely into the end brackets. End Brackets bolt hole center is 5 7/16" (5.44").
End Brackets are fabricated from Black PETG material and are strong and tough and tolerant to heat and vibration. Other colors are available upon request.
PODS: Each speaker pod is composed of a Pod Base bracket that mounts to the 6” PVC tube and the generously sized Pod which securely holds the 3” speaker in an aesthetically pleasing eye catching form. Two (2) complete Pods with mounting hardware are provided in the kit. Pods bolt hole center is 3 5/8" (3.63").
Pod Base bracket is designed to fit directly to the tube or fit over layers of fabric that may be wrapped around the tube. The pod does not require that the PVC tube to be cut to mount the speaker and mounts to the base bracket with four (4) 8-32 black oxide BHCS.
Pods and Base Brackets are fabricated from Black PETG material and are strong and tough and tolerant to heat and vibration. Other colors are available upon request.
INSTRUCTIONS: A instruction manual is provided with the kit includes fabrication notes four mounting the End Brackets and Pod Bases.
RECOMMENDED TOOLS:
3/32” Hex Wrench (#8 BHCS)
11/32” box wrench or socket
3/16" or 13/64” drill bit (clearance hole for #8 machine screw) and drill
Center Punch
THANKS FOR YOUR INTEREST!
I have tried to build the best quality speaker kit with the best components available and I am always trying to improve store the design and add features. If you have any comments I would love to hear them. If you have any questions during your build I have provided contact information for technical support.
As with all my kits if you are not 100% satisfied with your purchase I will provide a 100% refund no questions asked! It is my utmost goal to provide the best product available to my customers!
Thank you looking!